SCORE

this album is purely related to this thread
http://www.suzuki-cappuccino.com/phpbb2/viewtopic.php?t=1475
requesting information on the rear number plate fixing, the fog/reversing lights, and the tool kit.
It shows a UK car with a "long type" number plate fitted, the original plate brackets, the fixings of the lamps in the mesh, the tool kit, and the stub aerial.[/img]

tool-kit; note the vacant slots for a box spanner and an open ended spanner. In the box spanner slot you can just see the small sheet-metal spanner for the aerial.

reversing lamp re-positioned to be clear of the long type plate

rear of mesh with reversing light fixings; the original holes for the studs are just visible, two holes to the left.

Note (following a prompt from an observant Member :wink: !)
take care that the wiring is not pulling against the edge of the hole in the mesh causing a potential chafing.

the original number plate mounting brackets (I removed them and fitted the plate directly onto the bumper with two rubber washers to pack it out clear of the bodywork)

the small black plastic stub originally supplied to replace the aerial

pliers are pretty much "universal Japanese toolkit" items

Photo shows (left to right) Cappo, Suzy SV650, spare, Honda

not absolutely identical, but all the same pattern (presumably different manufacturers).

exhaust trim bolt
M6 x 10mm long flanged head, Dacromet type finish.

this relates to the thread on "fuel in boot", showing the 3 spotwelds fixing the fuel filler-nozzle guide tube and flap.